CMI Wall Safes are designed to fit into a standard cavity brick wall.
DOOR: Heavy 12mm steel plate with full back dog locking, and hinged on hardened 12mm pins.
BODY: Reinforced 3mm steel with heavy steel frame around front edges.
LOCKING: All locks are protected by 6mm case hardened plates.
All models have one remove able shelf.
INSTALLATION OF STANDARD CMI WALL SAFE INTO STANDARD CAVITY BRICK WALL.
Step 1. Measure safe and mark out wall section to be removed.
Step 2. Using a masonry disk or by drilling a series of holes in a vertical line and with the aid of a hammer and bolster, remove only enough bricks to accept the safe.
Step 3. Paint top, bottom & both sides id safe with cemstick for mortar adhesion to safe.
Step 4. Lay a bed of mortar and paste top and both sides of safe with mortar, and insert safe flush into wall.
Step 5. Wind out anchor bolts into cavity from inside the safe.
Step 6. Finish mortar flush with wall and clean up.